Posts

Perodua Once Again Confirms “Investigating” Myvi GT

/1 Comment/in , , /by

At their Chinese New Year luncheon event, Perodua was once again posed the question of the eagerly-awaited Perodua Myvi GT, a hotter variant of the effervescent hatchback that was first mooted as a concept at the KL International Motorshow back in 2018. We first asked about the Myvi GT during Perodua’s 1H 2019 review event back in July last year, where the company confirmed that they were “looking into” the matter.

Since then, there have only been minor movements on the Myvi GT front it seems, with President & CEO Dato’ Zainal Abidin Ahmad skillfully avoiding saying anything concrete on the matter. Dato’ Zainal confirmed that there has been some progress, with the company actively evaluating the business case for the model, given that it will not only sit as the flagship of the range but justifiably command a bit of a premium over the current 1.5-AV top-dog. Additionally, the expected low volume of the car would pose a production headache for Perodua, which is looking to improve its tact times on its cars from both its factories (PMSB & PGMSB are Perodua’s two manufacturing plants, with PMSB tasked with the assembly of the Myvi).

2018 Perodua Myvi GT Concept – KLIMS’18

The car remains a contentious topic among Malaysians – many applaud the strong value-appeal of the Myvi, with the Myvi GT seemingly flying against Perodua’s efforts to streamline and ‘reduce baggage’ in the lineup. But others contend that the Myvi, and Perodua in general, is in desperate need of some character, and the Myvi GT would indeed be the injection of colour that the Sg. Choh company would benefit massively from.

Additionally (in our opinion), the Myvi GT would be an excellent opportunity for local vendors and supplier to shine: Specialists like FTuned Racing for example could be brought in to help sharpen the car’s handling (FTuned is helmed by a former PROTON R3 engineer with masses of accolades under his belt), while local racing personalities (like Karamjit Singh, for example) could be consulted to help further fine-tune the vehicle for maximum tractability and engagement.

How Perodua would go about pepping the car up mechanically remains to be seen – alternative tunes for the transmission and engine could be applied if Perodua wanted to offer modest performance gains. That said, with Dato’ Zainal confirming that “all new Perodua models” will be built off of the DNGA (Daihatsu New Global Architecture) platform, perhaps the Myvi GT will be saved for the next generation, where it could be offered with a sprightly turbocharged unit.

We’ll just have to wait and see.

  • 2018 Perodua Myvi GT Concept – KLIMS’18
  • 2018 Perodua Myvi GT Concept – KLIMS’18
  • 2018 Perodua Myvi GT Concept – KLIMS’18
  • 2018 Perodua Myvi GT Concept – KLIMS’18

Perodua ‘Confirms’ D55L/Kembara – Due H2 2020

/1 Comment/in , , /by

At their Chinese new year luncheon (cum year-in-review event), Malaysian automotive heavyweight Perodua made a surprise ‘confirmation’ that it will seek to introduce the heavily-rumoured ‘D55L’ compact SUV in the second-half of this year. We like to call the D55L model the ‘Kembara’ on the basis that, like the original, the D55L will be a high-riding A-segment machine that offers something ‘different’ from the rest of the Perodua range.

When the original Kembara was introduced, it was the very first Perodua to offer all-wheel drive and a tall seating position, which enabled owners to truly embrace the spirit of adventure (or their inner pengembara, as it were). The D55L, likewise, is set to offer an array of innovative new features as well, in a package that’s truly new for Perodua, and better suited to the pengembara of today.

Perodua’s head honcho Dato’ Zainal Abidin Ahmad responded to a series of questions from the media (ED: They were actually almost all from us) that Perodua will be using parent-company Daihatsu’s new DNGA (Daihatsu New Global Architecture) to develop its next model, and that the company will follow market trends & consumer demands in terms of developing their next model.

Interesting point you make there about SUVs, sir.

Additionally, Dato’ Zainal also offered up this slide showing us Perodua’s projected total industry volume (TIV) for 2020, which notably showed an increase in SUV marketshare of 4% year-on-year compared to 2019. Perodua is a company known for its secrecy; but that said, its management team are known for dropping hints by making members of the media ‘read between the data,’ as it were.

It seems pretty clear then that, with the use of DNGA confirmed for their next model and further allusion by way of suggesting consumer-led product development, that the D55L is well on its way to market introduction. With a launch slated for the second-half of 2020 (due to a need to stabilise production & delivery times for existing models, as well as an RM500-million upgrade to their PGMSB plant in Sg. Choh), we can’t help but wonder why Perodua remains conservative (almost bearish) with its 2020 sales projections.

But with the Perodua Aruz already in existence, you may ask what ‘unique innovations’ the D55L will offer. Based on the Daihatsu Rocky/Toyota Raize duo (the former being used for illustrative purposes here), the new A-segment crossover is powered by a new 1.0-litre 3-cylinder turbocharged petrol engine, mated to a CVT automatic gearbox that sends power to the front wheels.

Dato’ Zainal interestingly also made mention of the industry trend of downsizing engines, which help to minimise pollution, improve efficiency, and reduce overall running costs (like roadtax, and also fuel consumption). This further alludes that the D55L will be brought to the Malaysian market with minimal powertrain changes, which puts to rest the rumours and suggestions that Perodua may swap out the turbo-triple in the Daihatsu Rocky in favour of the tried-and-tested 1.5-litre VVTi presently employed by the Perodua Myvi and Perodua Aruz.

See? ‘Engine Downsizing = Right Sizing!’ according to Perodua.

Either way, you can rest assured that we at MalaysianMotoring will not only champion the cause to revive the much-loved ‘Kembara’ nameplate for the D55L, but pit Perodua’s little tyke up against the also eagerly-awaited PROTON X50, which Dr. Li Chunrong has also confirmed is slated for a 2020 introduction.

Stay tuned.

SPIED: ’19 PROTON Saga In Showrooms Ahead Of Launch

/0 Comments/in , /by

It seems that PROTON’s all ready to reveal its newest baby, a heavily-updated version of the current-generation Saga that’ll go a long way in righting a few wrongs. The PROTON Saga is a favourite among the MalaysianMotoring team (both videographers own one, albeit different generations) and with the newest model, PROTON aims to address bugbears that have bothered current-gen Saga owners for a while.

These spyshots, courtesy of our friends at Funtasticko reveal much about the new model. For starters, the exterior has been given a light going-over in the same vein as the updated PROTON Iriz & Persona, with a new colour palette (this one is called Rosewood Maroon and we like it), updated bumpers front and rear (with the fronts now gaining LED daytime running lights for the Premium variant), and new alloys (14″ for entry-level variants and 15″ for the Premium).

Inside the changes are pretty major though, with a floating central touchscreen infotainment system, with the full ‘Hi PROTON!’ GKUI system in the Premium, and the usual non-touchscreen system for the lower tiers. There’s also an updated instrument cluster ahead of the driver that now features a more modern speedometer & tachometer, as well as a dot-matrix driver’s information display nestled between the dials. Looks rather snazzy, doesn’t it?

While there’s been no official confirmation from PROTON, we’re made to understand that under the skin, the ’19 PROTON Saga will continue to use the same 1.3-litre VVT engine as the outgoing car with no major changes to the engine, but the Punch-sourced CVT-automatic gearbox has been swapped out with a 4-speed auto unit from Hyundai. This should improve NVH (noise, vibration, harshness) levels in the car dramatically, as well as address the Saga’s current issues of lacklustre transmission response, particularly in town and when driving spiritedly.

It may also hamper fuel consumption over long-distance drives, but that remains to be seen.

PROTON has yet to release official pricing for the ’19 PROTON Saga, but with the launch slated for later today, the wait shouldn’t be all too long now.

2020 Perodua Cars To Include Blind-Spot Monitoring

/0 Comments/in /by

At their bi-annual sales performance event held in the capital city, Perodua President & CEO Dato’ Zainal Abidin Ahmad announced that in compliance with upcoming safety standards, the Malaysian automotive heavyweight will be including blind-spot monitoring technology in the majority of its lineup, in order to ensure and maintain a full 5-star ANCAP rating for its models.

This was revealed by Dato’ Zainal without much prodding from members of the media, who were otherwise unaware of the new safety rulings. 

Dato’ Zainal also revealed that the company’s vaunted ASA (Advanced Safety Assist) active safety systems will be included in more of their cars in the near future (and all of their next-generation vehicles for certain), with the only exception to the rule being manual-transmission cars. This makes sense to us as we can’t wrap our head around the idea of a manual vehicle capable of braking & coming to a halt all on its own. Does it trigger the clutch? Who knows.

Regardless, the inclusion of blind-spot monitoring in new 2020-model year vehicles marks a huge step forwards for the motoring industry as a whole. This is not only for the protection of Perodua drivers & owners according to Dato’ Zainal, but will also stand to benefit the 600,000 motorcyclists on Malaysia’s roads. Blind spot monitoring has saved the lives and limbs of many motorcyclists in various instances where they might sit at just the right (or wrong) position as not to be seen by a driver checking their mirrors.

This is also an important move for Perodua as the company aims to protect its workforce, which according to Dato’ Zainal, the majority of which commute to and from work via motorcycle. 

Perodua Confirms “Looking Into” Myvi GT

/0 Comments/in /by

At a sales performance event in KL, Malaysian automotive juggernaut Perodua has finally let some air out of the bag surrounding the heavily-rumoured Myvi GT, an idea brought about by a concept car that was presented at the 2019 KLIMS as a concept car that caught the imagination of a large number of people.

Taking the question head-on, Dato Dr. Zahari Husin answered that while the KLIMS concept car was very costly to produce and will most certainly not make production, Perodua is indeed looking into the possibility of producing a ‘Myvi GT’ that is more affordable and more acceptable price-wise to Perodua’s customer base, which has lit the flame of possibility for those who hold the idea of a slightly-dearer but much more endearing version of the Perodua Myvi.

Confidential sources have reported that prior to the launch of the Perodua Myvi, the company had investigated the possibility of working with local suspension tuner and production company FTuned Racing, to deliver a drive & ride experience that is more in keeping with the tastes of Malaysian car buyers, both those keen on driving and those keen on durability. We’re made to understand that the deal fell through after a great deal of effort from both parties, due to an internal impasse that neither firm was open to negotiating on.

If Perodua picked up from where they left off with FTuned, it could result in a Myvi GT with properly competitive suspension components that would put it on par drive-wise with the PROTON Iriz. That would then raise another question regarding the chassis, and whether or not the chassis of the Myvi was developed with driver engagement in mind, or if it was merely made to be cost-, material-, and production-efficient. 

Looking beyond the obvious production speedbumps and developmental issues that will naturally crop up as Perodua moves towards making the Myvi GT a reality, we can’t help but toy with the idea a little more. The Perodua Myvi is already a very handsome and very well-designed thing, and in our review, we remarked that the Myvi lacked the positive feedback and engaging drive that the PROTON Iriz continues to win fans with. With the Myvi GT, sitting as perhaps the flagship Myvi model in the future, Perodua could win back fans and convert a few more buyers from non-national brands perhaps, all buying into the idea of a fun, sharp, reliable Malaysian hatchback.

  • 2018 Perodua Myvi GT Concept – KLIMS’18
  • 2018 Perodua Myvi GT Concept – KLIMS’18
  • 2018 Perodua Myvi GT Concept – KLIMS’18
  • 2018 Perodua Myvi GT Concept – KLIMS’18

Perodua Sets New H1 Sales Record – Up 4% Year-On-Year

/0 Comments/in /by

At a small media event held in the nation’s capital, Malaysian automotive heavyweight Perodua announced that it had performed splendidly over the first half of 2019, delivering the highest number of new cars yet for the manufacturer. This historic milestone was contributed to by the ‘tax holiday’ period that came about after the General Election, which served to grow the total industry volume (TIV) by some 2.4%.

Also contributing to Perodua’s successes was the arrival of the Perodua Aruz, the model’s first SUV since the ill-fated Nautica and warmly-received Kembara, which has served to breathe new light into the entry-level sub-RM100k SUV space. 

Dato’ Zainal Abidin Ahmad, President & CEO, PERODUA

“The increase in demand for our vehicles in the first six months of 2019 has had a positive impact on the automotive ecosystem as a whole, with parts purchases amounting to RM2.7-billion during this period. Based on our forecast for the second half of the year, we expect to purchase a total of RM5.4-billion with of parts for the whole of 2019. We have reached a stage in our history where we are earnestly seeking to build our brand abroad in a sustainable manner. However, this is on a long-term scale as brands do need time to build. Our hope is to make Malaysia proud,” said Perodua President & CEO, Dato’ Zainal Abidin Ahmad.

As a result of the positive performance, Perodua will be revising its annual target – previously set at 231,000 vehicles, Perodua will now aim to sell 235,000 vehicles in 2019, marking a 4,000 unit increase over earlier estimates. 

When looking at the individual model breakdown, the Perodua Aruz looks to retain its position as Malaysia’s best-selling SUV, with 15,000 sales recorded in the first half of this year and “a few more thousand by the end of next month” according to Dato’ Zainal. The Perodua Alza at 8,000 units sold in the first-half of this year represents Perodua’s slowest-selling model, though it’s still not a number to be scoffed at. When asked, Perodua’s top-management unanimously answered that there’s been little cannibalisation between the two models, and whatever cross-shopping has occurred are perfectly within Perodua’s original estimates that they calculated prior to the release of the Aruz SUV. 

They would also not comment about a new Alza, which is heavily rumoured to come about late this year or early next year. To that end, Dato’ Zainal remained coy, but hinted that at “current capability,” the company is capable of producing “one minor model change and one full model change per year.” Based on that comment, you can extrapolate when we can expect to see the next new model from Perodua.

It isn’t all smooth sailing though – last year’s sales figures, Dato’ Zainal noted, were inflated somewhat thanks to that tax holiday we mentioned earlier. To that end, Dato’ Zainal said that they “believe that the second half of the year will not be as healthy as what was recorded last year. The momentum of the first half is likely to reduce in the second half.” 

Perodua forecasts internally that Malaysia’s total industry volume for 2019 will remain at 600,000 units, though the Malaysian Automotive Association’s official numbers have yet to be released.