Malaysian automotive heavyweight Perodua may have enjoyed market leadership for a good 16 years now, but perhaps now more than ever, there’s a fire under its ass to ensure that its lead isn’t compromised.
I don’t believe I have to go into detail here, but for the uninitiated, I’m talking about the challenges that fellow national carmaker PROTON has levelled at it throughout 2019. With every model in its lineup updated, purchase prices reduced, kit levels enhanced and aftersales service given a thorough going-over, PROTON has mounted an aggressive attack on the Malaysian market that threatens Perodua’s marketshare, which accounts for over 40% of the total number of cars sold in the last year. While models like the Myvi and Axia are beyond reproach, with the former accounting for almost half of all Perodua sales, the Bezza is in a far more precarious position.
With prices starting at RM34,580 for the 1.0-litre three-cylinder Bezza G (M/T) and rising up to RM49,580 for the top-flight Bezza 1.3 AV with Advanced Safety Assist, there’s a clear price-gulf between the models. Saga Premium vs. Bezza AV the price difference is enough to account for more than 4,700L of fuel, which could certainly power the lesser vehicle for quite a while, given that the one we own manages less than 6L/100km with daily use.
But with things like active driver assistance features, better modern conveniences, and tried-and-tested reliability, many argue that the Bezza can very easily justify its price premium. Couple that with the improved driveability, interior quality, and reduced NVH levels, the Perodua Bezza feels like a car that’s worth more than it is.
Don’t believe us? Check out our video review and see for yourself.
https://www.malaysianmotoring.com/web/wp-content/uploads/2020/01/81659442_10219805123893975_3510670211499950080_n.jpg439638Aiman I. Abdullahhttps://www.malaysianmotoring.com/web/wp-content/uploads/2015/07/MM-Logo-B-e1436852522773.pngAiman I. Abdullah2020-02-19 12:00:292020-02-19 12:00:35VIDEO: 2020 Perodua Bezza Driven - Small Changes, Big Differences
National carmaker Perodua has today unveiled their refreshed Perodua Bezza, arriving to the market some 5 months after the launch of the updated PROTON Saga, and some four years after the model was first introduced. The Perodua Bezza has comfortably held the position as the most popular A-segment saloon since it was first launched back in 2016, with 184,000 units sold – critically however, that position has since been threatened by the new Saga, with the PROTON snagging the title as the best-selling compact saloon in the segment for two months in 2019.
This refresh then is critical for Perodua, as this updated Bezza will be tasked with fending off PROTON’s new contender for a few more years. But with the Saga holding a clear price advantage, the new Bezza truly tests Perodua brand loyalists like never before, with a gap as wide as RM10,000 in favour of the Saga at the top end. However, with pre-facelift models sold out since mid-December, bookings for Bezza models from last year were converted into bookings for the new car, which were then added to the 2,000 bookings received for the new Bezza since the registration of interest opened 5 days ago – which means that right off the bat, the new Perodua Bezza has some 10,000 orders already locked and loaded, with a further 4,000 units a month expected to move once orders stabilise.
The new Bezza continues to offer the same array of engines, with a 1.0-litre three cylinder motor in G models, and a 1.3-litre four-cylinder in the X and AV models. The pair put out 67hp/91Nm & 94hp/121Nm respectively, with a 4-speed automatic shared across the range. Only the base G comes with the option of a 5-speed manual now though, with manual X models being dropped from the lineup.
The changes with this refresh are limited to just specs and aesthetics, then. The new Bezza arrives with a more aggressive face, topped by new slim headlights and a new grille. The headlights are now LED and standard across the range, a move taken from the larger Myvi and Aruz. Down the flanks there are new alloy wheels – the 14s for the G models are shared with the smaller-capacity Myvi variants, while the 15s for the X and AV are an entirely new dual-tone design.
At the rear, changes are limited to a new bumper with a more aggressive design and ‘diffuser,’ as well as a new garnish between the taillights.
Inside, Perodua has lightly tweaked the aesthetics, though some changes are more obvious than others. The first thing that stands out is the incorporation of a contrasting silver element that runs across the dash, flicking upwards in the middle and framing the new centre stack. That centre stack itself now houses a new infotainment unit, again nicked from the Myvi and Aruz, which should offer things like satellite navigation and smartphone mirroring. Elsewhere there’s a new instrument cluster, featuring a more sophisticated look designed to inspire drivers (kononnya) that’s also now backlit in white for improved legibility.
There are no changes to report in the rear-half of the cabin though – unfortunately the rear bench remains as upright as it has ever been, a serious gripe among Bezza owners and potential buyers, though they seem to be a bit more sculpted to improve comfort somewhat. There are also no changes to the boot, with 508L of capacity on offer still. However with the facelift, Perodua has opted to add a small luggage net to the side of the boot, to improve load carrying capabilities a little bit.
Safety-wise, the Bezza continues to do well, at least for the posher variants. The X and AV models soldier on with 5-star ASEAN NCAP safety ratings, while the G models make do with just 4. ABS and EBD are standard across the range, while vehicle stability (VSC) and traction control (TSC) are the reserve of 1.3-litre models, with the AV going further by adding ASA 2.0.
Overall, the new Bezza certainly seems ready to take on the new PROTON Saga, albeit at a price disadvantage. That said with benchmark levels of kit and ten thousand units set to be delivered by the end of January, the Perodua Bezza shouldn’t have a tough time finding its way into the hearts and minds of buyers at all.
https://www.malaysianmotoring.com/web/wp-content/uploads/2020/01/2020-Perodua-Bezza-Launch-Photos-012020-05.jpg12801920Aiman I. Abdullahhttps://www.malaysianmotoring.com/web/wp-content/uploads/2015/07/MM-Logo-B-e1436852522773.pngAiman I. Abdullah2020-01-09 07:36:472020-01-09 17:31:30VIDEO: 2020 Perodua Bezza Lands - 3 Variants, ASA 2.0, RM35k-RM50k
Included in the press release regarding the commencement of bookings was a helpful graphic to list down all the new features of the Perodua Bezza, helping to confirm some of the specifications we speculated about in our earlier post.
It confirms that the Bezza will follow the same route as the recently-facelifted Axia, offering only three trim levels: G 1.0, X 1.3, and AV 1.3. Only the entry-level G variant will be offered with a choice between a 5-speed manual or a 4-speed automatic, with the rest of the range getting only the automatic transmission.
Additionally, only the G models will go on sale without safety features lke vehicle stability control (VSC) and traction control (TRC). ABS and electronic brake distribution (EBD) are, mercifully, standard. So too are electric side mirrors, with G & X models now getting integrated turn signals, and AV models getting electric folding units instead.
The bigger news pertains to the X and AV models, with both featuring VSC and TRC as standard, but the AV now gets advanced safety assist (ASA 2.0) for the first time, just like the facelifted Axia. This is in line with Perodua’s goal of moving the industry forwards by offering innovative features at unbeatable pricepoints to set the bar higher for its competitors.
The press release also confirms what we already know – there are new bumpers on either end, standard LED headlights across the range, a smaller upper grille (with different finishes for 1.0-litre and 1.3-litre models) and larger under-breather, and new alloy wheels (14-inch units for the 1.0-litre, and 15-inch ones for the 1.3-litre models). The facelift Bezza also touts a redesigned instrument cluster (now featuring white backlighting) and keyless entry & go (1.3-models only).
What we’ve also managed to get our hands on are price-lists for the new 2020 Perodua Bezza, though so far we cannot confirm the veracity of these documents. It states that the prices for the new Bezza will be as follows:
Perodua Bezza G M/T – RM34,580
Perodua Bezza G A/T – RM36,580
Perodua Bezza X A/T – RM43,980
Perodua Bezza AV A/T – RM49,980
*all prices are on-the-road, without insurance
What’s worth noting is the RM7,400 price gulf between the G and X variants, a gap that’s large enough to lose some customers in between. Normally carmakers will try and price their products close enough that potential customers can be ‘upsold’ to the plusher model, but it seems that Perodua is taking a slightly different tact here.
Additionally, the Perodua Bezza AV is now nearly RM10,000more expensive than the new PROTON Saga Premium, which is also offered with a 1.3-litre engine and a 4-speed automatic. This is again in keeping with Perodua’s shift to becoming a value-driven brand rather than a maker of economy cars, as they have no doubt that buyers keen on getting the best features in the category (like ASA 2.0, LED headlights, and keyless entry/go) will not be swayed by the more affordable PROTON.
Two body colours new to the Bezza – Garnet Red (exclusive for 1.3-litre models) and Granite Grey – join the existing four colours on offer (Ivory White, Glittering Silver, Ocean Blue, Sugar Brown) to make a total of 6 available colour choices.
https://www.malaysianmotoring.com/web/wp-content/uploads/2020/01/81459868_10219805132214183_4994199271847755776_n.jpg355554Aiman I. Abdullahhttps://www.malaysianmotoring.com/web/wp-content/uploads/2015/07/MM-Logo-B-e1436852522773.pngAiman I. Abdullah2020-01-03 10:12:292020-01-03 14:10:062020 Perodua Bezza Open For Booking - Specs Confirmed, Prices Leaked
Our friends at Perodua are known for running an amazingly tight ship, with information only spread within relevant departments to reduce the risk of information leaking out ahead of official announcements. We know this for a fact because even when we lightly tortured staffers there, they refused to give up any information regarding new models or proposed timelines.
But despite their best efforts, photos have managed to leak out anyway. Posted in a Facebook group called Live Car Breathe Car by group administrator Chin Swee Hoe, these photos show the new 2020 Bezza in all its glory, revealing its new updates almost in their entirety.
The new Bezza seen here is strutting its stuff in a new colour, which appears to be a halfway-point between the Rosewood Maroon & Ruby Red offered by its main competitor, the PROTON Saga. It’s clear to see that up front, the new bumpers frame brand-new headlights which appear to be packing LED lighting for the first time in the A-segment, which is most certainly a good sign. The front bumper itself is far more aggressive in this iteration with large pseudo air-intakes around the fog-lights and a more aggressive lower breather, and it gives it a face that isn’t too far off what we’re seeing with the current-generation Toyota Vios.
Down the back there’s just a new bumper with similar pseudo air-intakes to be seen, as well as a prominent rear diffuser. We’re certain that Perodua will reason these upgrades as ways to make the car appear broader and more stable, though overall we’re fully aware that this more aggressive design is in response to market demand.
There are also new alloy wheel designs – the ones seen here are the 15-inch units, which we believe are reserved for the 1.3-litre models, while 1.0-litre models will get the 14-inch ‘turbine’ alloys from the Perodua Myvi 1.3.
Inside there are more changes than we anticipated, with a new dashboard design put forward, with silver accents (though these are likely to be reserved for the top-most ‘AV’ trim). The overall design of the dash appears to incorporate traits from the Aruz flagship SUV (notice how the silver accents tick upwards around the centre stack), as well as existing bits from the Bezza (like the rectangular air vents on either side). If you squint, you can almost make out a new, more sporty meter cluster (said to use white backlighting this time round) as well as a new infotainment unit.
On that infotainment unit, it’s clear that the new Bezza will receive the same touchscreen head unit as seen in the recently-facelifted Perodua Axia, offering bluetooth, smartphone mirroring and the like, as per the Axia AV. And given that the Axia AV also introduced advanced safety assist (ASA) with the latest refresh, we can expect to see that incorporated here too.
There also appears to be a new boot net in the… uh, boot. Which is nice.
There shouldn’t be any changes to the powertrain, with the Bezza soldiering on with either a 1.0-litre three-cylinder engine or a 1.3-litre four-cylinder engine, with either a 4-speed automatic or a 5-speed manual. We expect to only see the manual available for base 1.0-litre models only though, just like what happened to the Axia with its facelift.
There aren’t any major price revisions expected with the 2020 Perodua Bezza, which is rumoured to be launching within the next couple of weeks. We should see either a slightly shuffled lineup with the new Bezza, or maybe no changes at all given the popularity of the compact saloon in our market.
We’re made to understand that the booking forms will be opening on the new Perodua Bezza soon, with a launch date within the next 14 days. Either way, we’re glad to see that the Bezza has been revised to keep it fighting fresh for the new decade (ha!) and we can’t wait to put this up against our own grey PROTON Saga.
At their bi-annual sales performance event held in the capital city, Perodua President & CEO Dato’ Zainal Abidin Ahmad announced that in compliance with upcoming safety standards, the Malaysian automotive heavyweight will be including blind-spot monitoring technology in the majority of its lineup, in order to ensure and maintain a full 5-star ANCAP rating for its models.
This was revealed by Dato’ Zainal without much prodding from members of the media, who were otherwise unaware of the new safety rulings.
Dato’ Zainal also revealed that the company’s vaunted ASA (Advanced Safety Assist) active safety systems will be included in more of their cars in the near future (and all of their next-generation vehicles for certain), with the only exception to the rule being manual-transmission cars. This makes sense to us as we can’t wrap our head around the idea of a manual vehicle capable of braking & coming to a halt all on its own. Does it trigger the clutch? Who knows.
Regardless, the inclusion of blind-spot monitoring in new 2020-model year vehicles marks a huge step forwards for the motoring industry as a whole. This is not only for the protection of Perodua drivers & owners according to Dato’ Zainal, but will also stand to benefit the 600,000 motorcyclists on Malaysia’s roads. Blind spot monitoring has saved the lives and limbs of many motorcyclists in various instances where they might sit at just the right (or wrong) position as not to be seen by a driver checking their mirrors.
This is also an important move for Perodua as the company aims to protect its workforce, which according to Dato’ Zainal, the majority of which commute to and from work via motorcycle.
https://www.malaysianmotoring.com/web/wp-content/uploads/2019/07/MM-News-Perodua-H1-2019-Performance-Review-Gallery-03-07.19.jpg11252000Aiman I. Abdullahhttps://www.malaysianmotoring.com/web/wp-content/uploads/2015/07/MM-Logo-B-e1436852522773.pngAiman I. Abdullah2019-07-17 17:44:012019-07-17 17:44:502020 Perodua Cars To Include Blind-Spot Monitoring
At a sales performance event in KL, Malaysian automotive juggernaut Perodua has finally let some air out of the bag surrounding the heavily-rumoured Myvi GT, an idea brought about by a concept car that was presented at the 2019 KLIMS as a concept car that caught the imagination of a large number of people.
Taking the question head-on, Dato Dr. Zahari Husin answered that while the KLIMS concept car was very costly to produce and will most certainly not make production, Perodua is indeed looking into the possibility of producing a ‘Myvi GT’ that is more affordable and more acceptable price-wise to Perodua’s customer base, which has lit the flame of possibility for those who hold the idea of a slightly-dearer but much more endearing version of the Perodua Myvi.
Confidential sources have reported that prior to the launch of the Perodua Myvi, the company had investigated the possibility of working with local suspension tuner and production company FTuned Racing, to deliver a drive & ride experience that is more in keeping with the tastes of Malaysian car buyers, both those keen on driving and those keen on durability. We’re made to understand that the deal fell through after a great deal of effort from both parties, due to an internal impasse that neither firm was open to negotiating on.
If Perodua picked up from where they left off with FTuned, it could result in a Myvi GT with properly competitive suspension components that would put it on par drive-wise with the PROTON Iriz. That would then raise another question regarding the chassis, and whether or not the chassis of the Myvi was developed with driver engagement in mind, or if it was merely made to be cost-, material-, and production-efficient.
Looking beyond the obvious production speedbumps and developmental issues that will naturally crop up as Perodua moves towards making the Myvi GT a reality, we can’t help but toy with the idea a little more. The Perodua Myvi is already a very handsome and very well-designed thing, and in our review, we remarked that the Myvi lacked the positive feedback and engaging drive that the PROTON Iriz continues to win fans with. With the Myvi GT, sitting as perhaps the flagship Myvi model in the future, Perodua could win back fans and convert a few more buyers from non-national brands perhaps, all buying into the idea of a fun, sharp, reliable Malaysian hatchback.
https://www.malaysianmotoring.com/web/wp-content/uploads/2019/07/MM-–-2018-Perodua-Concept-Myvi-GT-KLIMS18-01-07.19.jpg11252000Aiman I. Abdullahhttps://www.malaysianmotoring.com/web/wp-content/uploads/2015/07/MM-Logo-B-e1436852522773.pngAiman I. Abdullah2019-07-17 17:39:182019-07-17 17:40:35Perodua Confirms "Looking Into" Myvi GT
At a small media event held in the nation’s capital, Malaysian automotive heavyweight Perodua announced that it had performed splendidly over the first half of 2019, delivering the highest number of new cars yet for the manufacturer. This historic milestone was contributed to by the ‘tax holiday’ period that came about after the General Election, which served to grow the total industry volume (TIV) by some 2.4%.
Also contributing to Perodua’s successes was the arrival of the Perodua Aruz, the model’s first SUV since the ill-fated Nautica and warmly-received Kembara, which has served to breathe new light into the entry-level sub-RM100k SUV space.
“The increase in demand for our vehicles in the first six months of 2019 has had a positive impact on the automotive ecosystem as a whole, with parts purchases amounting to RM2.7-billion during this period. Based on our forecast for the second half of the year, we expect to purchase a total of RM5.4-billion with of parts for the whole of 2019. We have reached a stage in our history where we are earnestly seeking to build our brand abroad in a sustainable manner. However, this is on a long-term scale as brands do need time to build. Our hope is to make Malaysia proud,” said Perodua President & CEO, Dato’ Zainal Abidin Ahmad.
As a result of the positive performance, Perodua will be revising its annual target – previously set at 231,000 vehicles, Perodua will now aim to sell 235,000 vehicles in 2019, marking a 4,000 unit increase over earlier estimates.
When looking at the individual model breakdown, the Perodua Aruz looks to retain its position as Malaysia’s best-selling SUV, with 15,000 sales recorded in the first half of this year and “a few more thousand by the end of next month” according to Dato’ Zainal. The Perodua Alza at 8,000 units sold in the first-half of this year represents Perodua’s slowest-selling model, though it’s still not a number to be scoffed at. When asked, Perodua’s top-management unanimously answered that there’s been little cannibalisation between the two models, and whatever cross-shopping has occurred are perfectly within Perodua’s original estimates that they calculated prior to the release of the Aruz SUV.
They would also not comment about a new Alza, which is heavily rumoured to come about late this year or early next year. To that end, Dato’ Zainal remained coy, but hinted that at “current capability,” the company is capable of producing “one minor model change and one full model change per year.” Based on that comment, you can extrapolate when we can expect to see the next new model from Perodua.
It isn’t all smooth sailing though – last year’s sales figures, Dato’ Zainal noted, were inflated somewhat thanks to that tax holiday we mentioned earlier. To that end, Dato’ Zainal said that they “believe that the second half of the year will not be as healthy as what was recorded last year. The momentum of the first half is likely to reduce in the second half.”
Perodua forecasts internally that Malaysia’s total industry volume for 2019 will remain at 600,000 units, though the Malaysian Automotive Association’s official numbers have yet to be released.
https://www.malaysianmotoring.com/web/wp-content/uploads/2019/07/MM-News-Perodua-H1-2019-Performance-Review-Gallery-04-07.19.jpg11252000Aiman I. Abdullahhttps://www.malaysianmotoring.com/web/wp-content/uploads/2015/07/MM-Logo-B-e1436852522773.pngAiman I. Abdullah2019-07-17 17:33:252019-07-17 17:49:27Perodua Sets New H1 Sales Record – Up 4% Year-On-Year